Plastic film blowing machine

News Category

Contact Us

Dalian Youyan Plastic Machinery Co., Ltd.

Couplet: Feng Manager






Address: Chinese Lushunkou District of Dalian City, the three streams town (take Tuchengzi Dalian to Lushun Road westbound vehicle airport about 200 meters in front of about 100 meters)

Plastic film blowing machine daily operation what are the points?

Current Location: Home >> News >> Company news

Plastic film blowing machine daily operation what are the points?

Data:2015-11-05 00:00 Source: Click:

Plastic film blowing machine daily operation what are the points?

    The production of plastic film blowing machine is the film, these films are widely used according to different materials and characteristics with multiple fields. Applicable to all kinds of high - grade film packaging, plastic bag with film, protective film, etc.. This film because of its good barrier, preservation, anti frost, oxygen, anti - oil, can be widely used in light and heavy packaging. Such as a variety of fresh fruits, meat dish, liquid beverages, pickles, fresh milk, pharmaceutical products etc.. Plastic film blowing machine daily operation what are the points? Dalian film blowing machine manufacturers to teach you.

Plastic film blowing machineDaily operation attention:

1, check the drawing speed, control the film thickness;Ensure that do a good job with no deviation in production process, to improve the quality as much as possible.

2, well time form check the temperature control and heating appliances in good condition, pay attention to adjust each point in time, heating temperature in the range of indicators of good habits;If there are abnormal to solve in time.

3, observe whether film thickness is uniform, folding size whether accord with a standard, blown film width if there is deviation;And appropriate adjustments.

4, keep raw material proportioning and mixing, reject ratio imbalance operation;Pure raw material production to check good classification, in order to avoid the jagged effect quality.

5, check the control air cylinder pressure storage, not too high, but shall have the standby pressure.

6, check the raw materials have impurities, when have metal foreign bodies in immediately with a magnet to absorb foreign substance, stop check and immediately took out when necessary, to prevent damage to the machine operation.

7, check the reduction space and air compressor cylinder lubricating oil, ensure lubricating oil is enough when you boot operation.

8, regularly check the running motor temperature rise and mechanical transmission, can record data suggest good data can provide help for future operation.

plasticBlown film machineUse attention

1, the operation of the machine operator can not stand in the front, lest appear accidental injury and operating personnel.When blown film machine feed fight with metal impurities in raw material and operating small tools such as damage to the hard object fall into the barrel of the machine.No gloves when operating rotating machine, in case involved in injury.

2, check and add good reducer, the lubrication oil in the compressor, check the lubrication of mechanical transmission parts.Avoid dry operation damage the machine and noises.

3, mold discharging mouth uniform, can wear gloves slowly lift pipe, pipe end will be closed at the same time, the micro into gas regulator, from central hole of the plug in a small amount of compressed air, and then carefully stiff foam frame, plates, and wear into the traction roller, guide roller and coiling

4, film forming conditions, scope, improve the forming temperature, cooling air temperature and blowing ratio;Increasing the film turbidity and glossiness;Vice to improve.

5, you must check each operation starting power supply wiring whether there is a disconnect, leakage;Check instrument damage is not normal.To ensure the safety of the parts first before starting the normal, lest affect production and cause an accident.

6 of the pipe, blowing compressed air pressure to appropriate, cannot make the pipe burst, and to guarantee the stability of membrane tube symmetry, relative to guarantee the quality of production.

Plastic film blowing machine production is membrane, the membrane based on the characteristics of materials and widely used and different fields.Suitable for all kinds of high-grade packing film, plastic film, protective film, and so on.This film because of its good barrier property, moisture proof, anti frost, oxygen insulation, fresh, oil resistant, can be widely used in light and heavy package.Such as medical supplies all kinds of fresh fruit, meat, liquid beverage, pickles, fresh milk, etc. 

Plastic film blowing machine

Related Tags:Plasticfilmblowingmachine

Recently viewed:

  • 客户服务


Welcome Message
Please enter message content.
XML 地图 | Sitemap 地图