Plastic film blowing machine

News Category

Contact Us

Dalian Youyan Plastic Machinery Co., Ltd.

Couplet: Feng Manager

Phone/fax:086-0411-86260347

Hand:18624289888 

           13604263838

Mail box:21272059@qq.com

Network access:www.dlyouyan.com 

Address: Chinese Lushunkou District of Dalian City, the three streams town (take Tuchengzi Dalian to Lushun Road westbound vehicle airport about 200 meters in front of about 100 meters)

Do you know about blowing film machine have?

Current Location: Home >> News >> Industry news

Do you know about blowing film machine have?

Data:2016-01-11 16:21 Source: Click:

Blown film unit




Do you know about blowing film machine have?



Blown film machineBlown film is often do cargo transportation, food packaging, preservation, biotechnology and other industry products, the quality of the film blowing machine and blowing film technology determines the quality of the film forming.So a good performance in the film blowing machine in the process of production of thin films showed good ability to adapt the market, improve the production efficiency at the same time, provide convenience for the people and promote the harmonious development of society.Wind ring device is mainly composed of blower, air distributor, wind ring and air duct, by the blower blew out romantic via air distributor by duct into the wind to die ring and bubble, achieve the purpose of the cooling.


Blown film machine, dry polyethylene particles in the hopper, depend on the weight of the particles themselves from the hopper into the screw, when the aggregate after contact with thread oblique edge rotating slant edge face plastic produce and inclined faces the vertical edges of thrust, plastic particles move goes on, goes on in the process of molten plastic by head die out from the die and approved by the wind ring cooling, blowing the herringbone board, drawing roller, winding the finished film rolled into a cylinder.


Low density polyethylene PE is a kind of plastic material, it is suitable for thermoplastic processing a variety of molding process, forming good workability.LDPE main purpose is for thin film product, also used in plastic injection products, medical devices, pharmaceutical and food packaging materials, hollow blow molding products, etc.General units are fitted with units operation counters, by the button according to the total power supply, open the main switch, motor, respectively through the toggle switch and control the fuselage and tee, mouth mold each knob electric heating, a key part of two sets of coil adopted thermocouple temperature measurement and automatic temperature control automatically, the normal production process, the temperature can be automatically controlled, to ensure stable and reliable production process.Film blowing machine and a lot of kinds, there is PE, POF, and so on.

Related Tags:Blownfilmunit

Recently viewed:

S
E
R
V
E
R
  • 客户服务
二维码

scanning

Share
Welcome Message
Please enter message content.
Name
contact
Tel
Telephone/Mobile
XML 地图 | Sitemap 地图