Dalian Youyan Plastic Machinery Co., Ltd.
Couplet: Feng Manager
Address: Chinese Lushunkou District of Dalian City, the three streams town (take Tuchengzi Dalian to Lushun Road westbound vehicle airport about 200 meters in front of about 100 meters)
The method to solve the problem of plastic film blowing machine
With the development of economy, the rapid development of plastic flexible packaging, plastic flexible packaging has become the main way of food packaging, China's flexible packaging industry has become its own basic industrial chain. Die material uniform, can wear gloves slow lifting tube, and the tube billet end closed, ajar inlet regulating valve to from the center hole of the mandrel to add a small amount of compressed air, and carefully lighted foam frame, lambdoidal board, and penetrates into the traction roller, guide roll until coiling.
Plastic film blowing machine when operating the machine operator can not stand in front of Yu Zheng, in order to avoid accidentally hurt the operator. Feed film blowing machine prevent hard objects falling into the barrel of raw materials with metal impurities and the damage to the machine tools operation. The operation of rotating machinery is prohibited with gloves, in case of injury. Check the traction speed, control the film thickness; ensure that the production process to do a good job in the work of no deviation, as far as possible to improve the quality. Linear low density polyethylene, the structure is different from the general low density polyethylene, because there is no long chain.
Film is one of the largest amount of plastic packaging materials, due to its non-toxic, light quality, packaging beautiful and low cost characteristics. Therefore, the application continues to expand, almost penetrated into all aspects of industrial and agricultural products and daily necessities, plastic packaging film industry investment is growing rapidly.
This special material needs blowing machine with high-end traction and drawing ability, guarantee freely tough film products. Used for blowing high-low pressure polyethylene film unit. The products are widely used in composite film, packaging film, agricultural covering film, textile, garment bag or film packaging; main motor using VVVF, an increase of host speed stability, and can saving 30%, the screw and barrel by 38 of chromium, molybdenum, aluminum, after nitrogen treatment, the traction frame adopts lift, no matter blow large and small size film can make the best effect of cooling.
Film blowing machine blown film is usually done cargo transport, food packaging, fresh products, biotechnology and other industries, film blowing machine quality and film technology determines the film forming quality. So a good performance of the film blowing machine in the film production process showed good ability to adapt to the market, improve production efficiency at the same time, provide convenience for the people, and promote the harmonious development of the society.
Die material uniform, can wear gloves slow lifting tube, and the tube billet end closed, ajar inlet regulating valve to from the center hole of the mandrel to add a small amount of compressed air, and carefully lighted foam frame, lambdoidal board, and penetrates into the traction roller, guide roll until coiling, Dalian plastic film blowing machine production is a membrane. These films according to the properties of materials and different widely used with multiple fields.